Whether you need to replace an old faucet or install a completely new installation, this article will walk you through each step and the tools and materials needed.
How to Install a Kitchen Faucet?
1. Preparation
Wrenches, screwdrivers, pipe adhesive, Teflon tape, 2 pieces of water pipes, 1 piece of pull out hose, kitchen faucet, hose weight ball, etc.
2. Turn off water supply
Before installation, ensure that the water supply has been turned off.
Usually, a water supply switch can be found beside the water meter.
3. Remove the old faucet
Use a wrench or screwdriver to loose the screws from the old faucet and then remove it from the water pipe.
4. Perform cleaning
Use cleanser to clean the installation position, ensuring that there is no dirt and residue.
5. Install the new faucet
Insert the new faucet into the sink hole and check if it is aligned with the water pipe.
6. Fixing screws
Use a wrench to tighten the screw at the bottom of the faucet to ensure it is securely fixed, but be careful not to tighten too tightly to avoid damaging the faucet.
7. Connect the water pipe
In order to ensure there is no water leakage, you should use Teflon tape to connect the water pipe to the faucet. Wrap two to three layers of Teflon tape around the threads of the water pipe, and then insert the water pipe into the connection port at the bottom of the faucet. Use a wrench to tighten the connection.
8. Make Testing
Turn on the water supply and check if the faucet is working properly. Ensure there are no water leakage or other problems.
Summarize
The steps above are basic installation process for a pull-out kitchen faucet. Please ensure to follow the specific installation instructions for the faucet and adjust the steps if needed.
If you are not sure how to install the faucet, lt is suggested to consult a professional plumber.
